A–7

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A

C&K EP Series

Sealed Tiny Pushbutton Switches

Features/Benefits

cleaning processes

standard caps

Typical Applications

networking equipment

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. See page A-11 for additional ratings.

ELECTRICAL LIFE: EP11, EP21 models: 60,000 make-and-break

cycles at full load. EP12 models: 30,000 cycles.

CONTACT RESISTANCE: Below 20 m

Ω typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109

Ω min.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

DEGREE OF PROTECTION: IP57; Protection against harmful dust

deposit, full-scale voltage protection, temporary immersion.

PACKAGING: Surface mount switches standard in anti-static

tape and reel packaging per EIA 481-3, see page A-12 for

drawings and reel information. Tape and cover strip are

conductive for use near statically sensitive components,

consult Customer Service Center.

Materials

CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat

stabilized (UL 94V-0). SA surface mount: High temperature

material, glass filled nylon 4/6, flame retardant, heat

stabilized (UL 94V-0).

PLUNGER: Thermoplastic polyester or glass filled nylon (UL 94V-0),

with internal o-ring seal. SA surface mount: High temperature

material, glass filled nylon 4/6, flame retardant, heat stabilized

(UL 94V-0).

SWITCH SUPPORT: Brass, matte-tin plated.

CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. See page A-11 for additional

contact materials.

TERMINAL SEAL: Epoxy.

NOTE: Any models supplied with Q, B, P, S, R or G contact material are RoHS compliant. For

the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

CAUTION: PC mounting layouts and pads as shown are designed to be compatible with the

latest equipment and reflow techniques. Care should be taken in the design and location of

PC lands to suit individual needs. Orientation relative to reflow direction may significantly

impact solder joint integrity.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages A-8 thru A-11. For additional options not shown in catalog, consult Customer Service Center. All

models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

Plunger

S

.215" high

R

Snap-fitting, .215 high

Bushing

Contact Material

Seal

Models Available

Terminations

A

Right angle, PC thru-hole

C

PC Thru-hole

V3

Vertical mount, v-bracket

(EP11 & EP12 only)

W

Wire wrap