KPT datasheet(6/31 Pages) ITT

6 / 31 page

KPT/KPSE

Miniature circular connectors

Subject to changes

KPSE High performance crimp contact connectors

q High performance

q Crimp termination

q Closed entry socket contacts

Series KPSE environmental, miniature circular, quick

disconnect connectors are designed for the exacting

requirements of today`s electronic industry.

They are intermateable, intermountable and

interchangeable with all connectors manufactured

acc. to MIL-C-26482, LN 29500, VG 95328, NFC

93422 HE 301 and NFL 54125.

Connectors of ITT Cannon series KPSE have

obtained the VDE Expertise No. 63761.

4 Contact retaining clip

is completely encased in a tough plastic wafer to protect

the clip from damage.

Complete moisture sealing

is achieved by combining four seals: shell, peripheral,

interfacial and wire seals.

SHELL SEAL

is effected when the plug shell pushes against the

sealing ring in the receptacle when the connectors are

mated.

PERIPHERAL SEAL

around the edge of the pin insulator is designed so that

mating the connector puts tension on the seal and

greatly reduces compression set.

INTERFACIAL SEAL

is achieved by the insulator faces meeting when the

plug and receptacle are mated.

WIRE SEAL

is accomplished by a multiple ripple design, exceeding

the wire sealing requirements of MIL-C-26482.

5 Positive insert-to-shell mechanical retention

with hard plastic wafer firmly locked into a groove in

the shell, in addition to a strong adhesive bond between

the insert and shell.

1 Standard MIL-C-26482 or NFL 54 125 Hardware

mates with any connector designed to MIL-C-26 482,

LN 29500 or NF L 54 125 or NF C 93 422, HE 301

model

2 Crimp, snap-in contacts

are designed to MIL-C-23216 and can be crimped with

the standard M22520/1 crimp tool.

CLOSED-ENTRY SOCKET CONTACTS

eliminate damage from abuse by test probes and help

to correct any misaligned pins during engagement.

CONTACT INSERTION

is accomplished from the rear of the connector. When

the contact is fully inserted, the clip tines snap securely

behind the contact shoulder.

CONTACT EXTRACTION

is accomplished with a front-inserted extraction tool.

Pressing the tool plunger pushes the contact out

through the rear of the connector.

3 Monobloc insulator

does not leave any access to moisture and avoids

interfacial empty space.

KPT 数据表(PDF) 6 Page - ITT Industries

KPT 数据表(HTML) 6 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

数据表下载