•

Power and garden tools

•

Pumps and fans

•

Drones and aeromodelling

Description

The EVSPIN32G4 is a demonstration board based on the STSPIN32G4 system in

package and STL110N10F7 power MOSFETs. The STSPIN32G4 integrates in a 9x9

mm VFQFPN package, a triple high-performance half-bridge gate driver with a rich

set of programmable features and one mixed signal STM32G431 microcontroller.

The integrated operational amplifiers for current sensing, the drain-source voltage

sensing of each power MOSFET and comparators for overcurrent protection make it

a fully integrated solution for motor control.

Thanks to the integrated voltage regulators both the gate driver and control logic

supplies can be generated starting from the motor supply without dedicated circuitry.

The board ensures a full evaluation of the STSPIN32G4 and is designed for

driving three-phase brushless DC motors and provides an easy-to-use solution for

STSPIN32G4 evaluation in different applications such as power tools, e-Bikes, fans,

and home appliances.

The board can be configured in three-shunt or single-shunt supporting both sensor-

less and sensor-based control algorithms.

The Arduino connector enables the EVSPIN32G4 to be interfaced with expansion

boards, such as MEMS sensors or Bluetooth transceivers, while predisposition for

CAN bus allows interconnection with master or slave modules to build complex

motion control systems.

The on-board ST-LINK/V2 programmer speeds up and simplifies the debugging of

microcontroller firmware.

EVSPIN32G4, EVSPIN32G4NH

DB4420 - Rev 1

page 2/18