ED-IPC2000 Series Datasheet

EDA Technology Co.,LTD

9

3.3 Right Panel

3.3.1 Reset Button

The reset button is a hidden button, and the device will automatically restart after pressing this button.

Reset button is connected with the Global_EN pin of CM4, and when this pin is pulled down, the CM4

module will be reset. Pressing the reset button will set the Global_EN pin to a low level, thereby resetting

the ED-IPC2000 series device.

3.3.2 USB 2.0

IPC2000 series have 1 USB 2.0 Type-A, which is used as a burning interface when burning the system.

The official Raspberry Pi OS does not enable USB for CM4 by default. If the BSP provided by our

company has been installed in the system, this interface can be used as a regular USB 2.0.

Pin ID

Pin Name

1

5V

2

D-

3

D+

4

GND

3.3.3 USB 3.0

IPC2000 series have 2 USB 3.0 type-A. Users can extend other peripherals at this interface.