2

PI5V330A

Low On-Resistance Wideband/Video

Quad 2-Channel Mux/DeMux

PS8695B

03/01/05

Storage Temperature ..........................................................–65°C to +150°C

Ambient Temperature with Power Applied .........................–40°C to +85°C

Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V

DC Input Voltage ..................................................................–0.5V to +7.0V

DC Output Current.............................................................................120mA

Power Dissipation .................................................................................0.5W

Note:

Stresses greater than those listed under MAXIMUM RAT-

INGS may cause permanent damage to the device. This is

a stress rating only and functional operation of the device

at these or any other conditions above those indicated in the

operational sections of this specification is not implied. Ex-

posure to absolute maximum rating conditions for extended

periods may affect reliability.

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

A

= 25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch. On-Resistance is determined by the

lower of the voltages on the S1, S2, and D I/O pins.

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Parameters

Description

Min.

Analog Signal Range

0

2.0

V

Input HIGH Voltage

Guaranteed Logic HIGH level

2.0

Input LOW Voltage

Guaranteed Logic LOW Level

-0.5

0.8

Input HIGH Current

±1

µA

Input LOW Current

±1

Analog Output

Leakage Currnet

±1

Clamp Diode Voltage

-0.7

-1.2

V

150

mA

Input Hysteresis at

Control Pins

3

7

mV

Switch On-Resistance

3

7

10

Ω