7

Ordering Guide for POF

Cable

For Example:

HFBR-RUD500 is a Standard

Attenuation, Unconnectored,

Duplex, 500 meter cable.

HFBR-RLS001 is a Standard

Attenuation, Latching Simplex

Connectored, Simplex, 1 meter

cable.

HFBR-RMD010 is a Standard

Attenuation, Standard Duplex

Connectored, Duplex, 10 meter

cable.

HFBR-RMD100 is a Standard

Attenuation, Standard Duplex

Connectored, Duplex, 100 meter

cable.

Connector Code

U = Unconnectored

N = Standard Simplex Connectors

L = Latching Simplex Connectors

M = Standard Duplex Connectors

T = Latching Duplex Connectors

Cable Code

R = Standard Attenuation POF

E = Extra Low Loss POF

HFBR-

Channel Code

S = Simplex Cable

D = Duplex Zipcord Cable

Length Code (measured from tip of

connector to tip of connector)

1-500 meters in 1 meter increments

e.g. 015 = 15 meters

1-10 meters in 1 decimeter increments

e.g. 15D = 1.5 meters

Ordering Guide for POF Connectors and Accessories

Plastic Optical Fiber Connectors

HFBR-4501

Gray Simplex Connector/Crimp Ring

HFBR-4511

Blue Simplex Connector/Crimp Ring

HFBR-4503

Gray Simplex Latching Connector with Crimp Ring

HFBR-4513

Blue Simplex Latching Connector with Crimp Ring

HFBR-4506

Parchment Duplex Connector with Crimp Ring

HFBR-4516

Gray Duplex Latching Connector with Crimp Ring

HFBR-4505

Gray Adapter (Bulkhead/Feedthrough)

HFBR-4515

Blue Adapter (Bulkhead/Feedthrough)

Plastic Optical Fiber Accessories

HFBR-4522

500 HFBR-0500 Products Port Plugs

HFBR-4525

1000 Simplex Crimp Rings

HFBR-4526

500 Duplex Crimp Rings

HFBR-4593

Polishing Kit (one polishing tool, two pieces 600 grit

abrasive paper, and two pieces 3

µm pink lapping film)

HFBR-4597

Plastic Fiber Crimping Tool

Cable Length Tolerances:

The plastic cable length

tolerances are: +10%/-0%.

NOTE: By convention, pre-

connectored simplex POF cables

have gray and blue colored

connectors on the opposite ends

of the same fiber; although

oppositely colored, the

connectors are mechanically

identical. Duplex POF cables with

duplex connectors use color-

coded markings on the duplex

fiber cable to differentiate

between the channel.

Note: Not all possible combinations reflect available part numbers. Please contact

your local Agilent representative for a list of current available cable part numbers.