ADCMP603

Rev. 0 | Page 7 of 16

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

PIN 1

INDICATOR

1

2

3

8LE/HYS

TOP VIEW

(Not to Scale)

ADCMP603

Figure 3. ADCMP603 Pin Configuration

Table 5. Pin Function Descriptions

Pin No.

Mnemonic

Description

1

V

Output Section Supply.

CCO

2

Input Section Supply.

3

Negative Supply Voltage.

4

Noninverting Analog Input.

5

Negative Supply Voltage.

6

Inverting Analog Input.

7

Shutdown. Drive this pin low to shut down the device.

8

LE/HYS

Latch/Hysteresis Control. Bias with resistor or current for hysteresis adjustment; drive low to latch.

9

Negative Supply Voltage.

10

Q

for more information.

11

Negative Supply Voltage.

12

Q

(Pin 8) for more information.

V

Heat Sink

Paddle

The metallic back surface of the package is electrically connected to V

EE

EE

. It can be left floating because Pin 3, Pin 5,

Pin 9, and Pin 11 provide adequate electrical connection. It can also be soldered to the application board if

improved thermal and/or mechanical stability is desired. Exposed metal at package corners is connected to the

heat sink paddle.