R710 INCLUDES A BUILT-IN STEP PULSE MULTIPLIER BOARD

The R710 has the same features as the R701 plus two additional features:

Input Option Header – allows the use of a Common Ground or a Common +5VDC for optically isolated inputs

Step Pulse Multiplier – will always output 10 microstepping, even with a step input of Full Step, Half Step, 5 Microstep, or

10 Microstep. The user no longer needs to change their original setup to get microstepping. Simply select the desired step

multiplier of 1, 2, 5 or 10; to achieve the 10 microstepping output from the driver, while maintaining the rotational speed that

you had in your original setup.

DI ENSION