NB2779A datasheet(4/8 Pages) ONSEMI

4 / 8 page

NB2779A

http://onsemi.com

Table 4. DC ELECTRICAL CHARACTERISTICS FOR 2.5 V SUPPLY

(Test Conditions: All parameters are measured at room temperature 25°C)

Symbol

Description

Min

Typ

Max

Unit

VIL

Input LOW Voltage

GND − 0.3

0.8

VIH

Input HIGH Voltage

2.0

VDD + 0.3

IIL

Input LOW Current

−35

IIH

Input HIGH Current

IXOL

XOUT Output LOW Current (@ 0.5 V, VDD = 2.5 V)

3.0

IXOH

XOUT Output HIGH Current (@ 1.8 V, VDD = 2.5 V)

3.0

VOL

Output LOW Voltage (VDD = 2.5 V, IOL = 8.0 mA)

0.6

VOH

Output HIGH Voltage (VDD = 2.5 V, IOH = 8.0 mA)

1.8

IDD

Static Supply Current (Note 1)

ICC

Dynamic Supply Current (2.5 V, 16 MHz, and No Load)

3.0

VDD

Operating Voltage

2.375

2.5

2.625

tON

Powerup Time (first locked cycle after powerup) (Note 2)

5.0

ZOUT

Clock Output Impedance

NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit

board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared

operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit

values are applied individually under normal operating conditions and not valid simultaneously.

1. XIN/CLKIN pin and PD are pulled low.

2. VDD and XIN/CLKIN input are stable, PD pin is made high from low.

Table 5. AC ELECTRICAL CHARACTERISTICS FOR 2.5 V SUPPLY

Symbol

Description

Min

Typ

Max

Unit

CLKIN

Input Frequency

MHz

ModOUT

Output Frequency

MHz

Frequency Deviation

Input Frequency = 13 MHz

Input Frequency = 30 MHz

±1.15

±0.6

tLH (Note 3)

Output Rise Time (measured at 0.7 V to 1.7 V)

0.7

1.4

1.8

tHL (Note 3)

Output Fall Time (measured at 1.7 V to 0.7 V)

0.4

0.9

1.1

tJC

Jitter (Cycle−to−Cycle)

200

Output Duty Cycle

NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit

board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared

operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit

values are applied individually under normal operating conditions and not valid simultaneously.

3. tLH and tHL are measured at capacitive load of 15 pF.

NB2779A 数据表(PDF) 4 Page - ON Semiconductor

NB2779A 数据表(HTML) 4 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8

数据表下载