PTMC210404MD

7

Rev. 04.1, 2022-1-27

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.

The information in this document is subject to change without notice.

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300

Package Outline Specifications – Package PG-HB1DSO-14-4

Diagram Notes–unless otherwise specified:

1. Mold/Dam Bar/Metal protrusion of 0.30 mm max per side not included.

2. Metal protrusion are connected to source and shall not exceed 0.10 mm max.

3. Fillets and radii: all radii are 0.3 mm max.

4. Interpret dimensions and tolerances per ISO 8015.

5. Dimensions are mm.

6. All tolerances ± 0.1 mm unless specified otherwise.

7. All metal surfaces are tin-plated, except area of cut.

8. Lead thickness: 0.25 mm.

TOP

VIEW

END VIEW

1

2X 0.50

2

18.44

16.26

0.05

2

1.00

1.02

0° MIN.

PG_HB1DSO-14-3_01_2-11-2020

SIDE

VIEW

DETAIL A

SCALE 3:1

BOTTOM

VIEW

2 X 10°

4 X 7°

1.86

SEE DETAIL A

0.10 MAX.

2.62

4 X 1.02

2 X 3.25

2 X 5.30

7.65

2.35

3.83

2 X 0.35

11 X 1.00

12 X 0.35

1.50

19.44

14.94 ± 0.15

1.27