SCC SERIES
Pressure Sensors
January 1998/040
Aubinger Weg 27, 82178 Puchheim, Germany
Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33
http://www.sensortechnics.com
provided for electrical connection to the
button package. The TO can and the DIP
offer a 5-pin open bridge configuration.
FEATURES
· 0 - 5 to 0 - 300 psi
· Low Cost Sensor Element
· Internal Temperature
Compensation
· Differential, Gage and
Absolute
APPLICATIONS
· Pneumatic Controls
· Automotive Diagnostics
· Medical Equipment
· Dental Equipment
· Environmental Controls
EQUIVALENT CIRCUIT
Button Sensor or "N" Package
(Open Bridge)
TO Can or DIP Package
GENERAL DESCRIPTION
The SCC series offer an extremely low
cost sensor element with a temperature
stable output when driven with a constant
current source. These integrated circuit
sen-sors were designed for extremely cost
sensitive applications where precise
accuracy over a wide temperature range
is not required. This series is intended for
use with non-corrosive, non-ionic working
fluids such as air and dry gases.
Absolute devices have an internal vacuum
reference and an output voltage proportio-
nal to applied pressure. The differential
devices allow application of pressure to
either side of the diaphragm and the devices
are thereby available to measure both dif-
ferential and/or gage pressures.
This product is packaged either in
SenSym´s standard low cost chip carrier
"button" package, a plastic ported "N"
package, a metal package or a dual inline
package (DIP). All packages are designed
for applications where the sensing element
is to be integral to the OEM equipment. The-
se packages can be O-ring sealed, epoxied,
and/or clamped onto a pressure fitting. A
closed bridge four-pin SIP configuration is
ELECTRICAL CONNECTIONS
+VS 3
out - 4
1
GND
out + 2
SCC..
TO Can
Button Sensor
(buttom view)
SCCxxxGD2
SCCxxxAD2
DIP
DIP
SCCxxxD4
DIP
+Vs
4
vent hole
out -
+Vs
1
out +
GND
4
out +
+Vs
1
out -
GND
+Vs
P1
GND
out -
1
out +
4
+Vs
P2
+Vs
Vs
-
Output
+
Output
Vs
+
-
Scale:
1cm
½ inch
The polarity indicated is for pressure applied to
SCC.../SCC...N
:
P1
(forward gage)
SCC...GD2
:
P2
(backward gage)
SCC...ASO/GSO
:
P1
(forward gage)
SCC...AD2
:
P1
(forward gage)
SCC...DD4
:
P2
(backward gage)
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
