GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM

REMOTE PROBE STRAP-ON TEMPERATURE SENSOR

TSRP SERIES

CABLE GLAND FITTING

THREAD ADAPTER 1/2” NPT TO M16

ACCESSORIES - INCLUDED WITH E ENCLOSURE OPTION

PRODUCT DESCRIPTION

The single point remote probe strap-on temperature

sensor utilizes a precision sensor encapsulated in

a 6mm (0.236”) OD, 304 series stainless steel probe

and is available in various lengths. Standard wire

length is 1.5m (5’). All probes are constructed to

provide excellent heat transfer, fast response and are

potted to resist moisture penetration.

TYPICAL INSTALLATION

For complete installation and wiring details,

please refer to the product installation

instructions.

For best results, thermal conductive compound

should be applied to pipe prior to mounting the

probe.

Find a suitable location along the pipe where both

the probe and remote enclosure can be mounted.

If necessary, remove a section of insulation from

the pipe. Position the probe directly on the pipe

and secure using a pipe clamp. For added security,

make 1 to 3 loops of the sensor cable around the

pipe and feed through wire hole on the enclosure

and secure using the supplied grommet. If

applicable, the pipe insulation can be re-applied to

the pipe over the probe.

SENSOR TYPE

Thermistor or RTD (see ordering chart)

SENSOR ACCURACY

Thermistors: ±0.2°C (±0.36°F) @ 25°C (77°F)

Platinum RTD’s: ±0.3°C (±0.54°F) @ 0°C (32°F)

Nickel RTD’s: ±0.4°C (±0.72°F) @ 0°C (32°F)

PROBE SENSING RANGE

-40 to 100°C (-40 to 212°F)

AMBIENT OPERATING RANGE

0 to 50°C (32 to 122°F), 5 to 95 %RH non-condensing

WIRE MATERIAL

PVC insulated, parallel bonded, 22 AWG

WIRE LENGTH

1.524m (5’)

PROBE MATERIAL

304 series stainless steel

PROBE DIAMETER

6mm (0.236”)

ENCLOSURE

A: ABS, UL94-V0, IP65 (NEMA 4X)

C: same as A, with a terminal block

E: Same as C, with thread adapter and cable gland fitting

TERMINATION

A: Pigtail, 2 or 3 wire

C & E: Terminal block, 2 or 3 wire

COUNTRY OF ORIGIN

Canada

SPECIFICATIONS

82.5 mm

3.25"

69.8 mm

2.75"

0.5” NPT

76.2 mm

3.00"

52.0 mm

2.05"

1.524 m

5.00’

6.0 mm

0.236"

Various Probe Lengths

See Ordering Chart

22 AWG, PVC Insulation 304 Series S/S Probe