GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM

SLAB TEMPERATURE SENSOR

TSSL SERIES

PRODUCT DESCRIPTION

The TSSL single point slab temperature sensor

utilizes a precision sensor encapsulated in a

thermal conductive coating (ZW, FT & MP) and

used to measure the temperature of a concrete

slab. The MS is encapsulated and potted in a 12.7

mm (0.5”)D X 101.5 mm (4”)L double walled, S/S

probe that allows for total liquid submersion. They

are available with various sensor types, wire types

and lengths. All probes are constructed to provide

excellent heat transfer, fast response and to resist

moisture penetration.

TYPICAL INSTALLATION

For complete installation and wiring details,

please refer to the product installation

instructions.

ZW, FT & MP: Typically a predetermined area is

defined where the temperature reading is required.

During concrete installation a sufficent length

of conduit or copper tubing is imbedded from

this point to an area that will be accessible once

complete. At the entrance to the sensor chamber,

unravel the TSSL and carefully insert sensor and feed

into chamber until the chamber end is reached.

MS: Unravel the sensor and lower the probe in the

tank until below the liquid line or at desired depth.

Secure cable to maintain depth. The probe may

also be attached to the tank wall with some form of

clamp at desired depth.

SENSOR TYPE

Various Thermistor or RTD

TEMPERATURE RANGE

ZW: -20 to 105°C (-4 to 221°F)

FT: -20 to 60°C (-4 to 140°F)

MP/MS: -20 to 80°C (-4 to 176°F)

WIRE MATERIAL

ZW: PVC Zip wire, 22 AWG

FT: Plenum rated FT-6, 22 AWG

MP: EPC Moisture proof, 20 AWG

MS: EPC Moisture proof, 20 AWG

PROBE

MS: Double walled, 304 S/S, 12.7mm D x 101.5mm L (0.5” x 4”)

TERMINATION

Pigtail 2 or 3 wire

COUNTRY OF ORIGIN

Canada

SPECIFICATIONS

Sensor chamber previously

embedded in slab

Water Tank

Sealed Sensor

B

Various lengths

available

A

Model

A

B

ZW, FT, MP

25.4mm (1”)

6.35mm (0.25”)

MS

101.6mm (4”)

12.7mm (0.5”)

ZW, FT or MP

MS