1.

Product profile

1.1 General description

Common-mode ElectroMagnetic Interference (EMI) filters with integrated ElectroStatic

Discharge (ESD) protection for one, two and three differential channels. The devices are

designed to provide low insertion loss for differential high-speed signals on each channel

while unwanted common-mode signals are attenuated.

Each differential channel incorporates two signal lines that are coupled by integrated coils.

Diodes provide protection to downstream components from ESD voltages up to ±15 kV on

each signal line.

1.2 Features and benefits

 One, two and three differential channels common-mode EMI filters with integrated

ESD protection

 ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2

 Superior common-mode suppression over a wide frequency range

 Superior RF performance compared to other integrated filters or discrete filters with

external ESD protection

 Extremely high symmetry between line pairs

 Industry-standard Wafer Level Chip Scale Packages: WLCSP5, 10 and 15 for smaller

footprint

1.3 Applications

 Smartphone, cellular and cordless phone

 Tablet PC and Mobile Internet Device (MID)

 USB 3.1, USB 2.0, HDMI 2.0, HDMI 1.4

 MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial

Interface (DSI)

 General-purpose EMI and Radio-Frequency Interference (RFI) filter and downstream

ESD protection

PCMFxUSB30 series

Common-mode EMI filter for differential channels with

integrated ESD protection

Rev. 1 — 01 April 2016

Product data sheet

Table 1.

Product overview

Type number

Number of channels

Package Name

PCMF1USB30

1

WLCSP5

PCMF2USB30

2

WLCSP10

PCMF3USB30

3

WLCSP15