The Specialist In Drum Handling Equipment

Vertical-Lift Drum Pourers

Copyright 2023 - Morse Mfg. Co., Inc.

Spec Sheet 500

(Updated 11 Aug, 2023)

2

MADE

IN

USA

DIAMETER ADAPTORS

DIAMETER

ADAPTORS

SPARK

RESISTANT

FITS DIAMETER

55/30-20.5 55/30M-20.5 20” to 20.5” (50.8 to 52.1 cm)

55/30-19

55/30M-19

18.5” to 19” (47 to 48.3 cm)

55/30-17.5 55/30M-17.5 17” to 17.5” (43.2 to 44.5 cm)

55/30-16

55/30M-16

15.5” to 16” 39.4 to 40.6 cm)

55/30-14.5 55/30M-14.5 14” to 14.5” (35.6 to 36.8 cm)

The MORCINCHTM drum holder on Hydra-Lift Karriers is designed

to handle a 55-gallon (210 liter) steel or fiber drum. It automatically

adjusts from 22” to 23.5” (56 to 59.7 cm) in diameter. The cinch chain

with pawl and ratchet mechanism is used to secure the drum in the

holder. To handle other drums, order one of the following:

Install

Top Rim Clamp Kit 4560B-P to safely handle a

RIMMED 30-gallon to 55-gallon (114 to 210 liter) size

plastic drum. Grips upper drum rim to prevent slipping

length-ways.

Kit # 4560B-P Rim Clamp Assembly

Kit # 4560BM-P Spark Resistant Rim Clamp Assembly

The

Bracket Assembly provides a brace at top

and bottom of your drum to prevent it from slipping

lengthways through the drum holder. The Bracket

Assembly is required to handle a rimless plastic drum,

and recommended to more securely handle a fiber

drum. It adjusts for 31” to 39” (79 to 99 cm) tall drum.

Part # 4556-P Bracket Assembly

Part # 4556M-P Spark Resistant Bracket Assembly

For a smaller diameter drum, Diameter Adaptors

install easily without tools and are quickly removed.

Diameter Adaptors for 17.5” (44.5 cm) diameter or

smaller have brackets at top and bottom of the drum.

They adjust for a drum up to 38” (96.5 cm) tall. Spark

resistant and stainless steel Diameter Adaptors are

also available.

Model

55/30-17.5

MORCINCHTM Options

To order complete units with any of the power options below, use the power option number as

a suffix on manual model number. Example: Model 520-115 has battery powered lift and tilt

up to 106” (269 cm) high. Power-Tilt Options must be ordered on new units from the factory.

All units with power options factory installed are shipped fully assembled.

3-Piece Drum Holder

Option # G-400

The optional 3-Piece Drum Holder is for

handling only a 22.5” (57.2 cm) diameter

55-gallon (210 liter) steel drum. It surrounds

your drum with a hinged metal band.

Power Lift and Tilt Models

Power Lift and Tilt Models

make drum handling easier

and faster. There are two hand

valve controls: One for the

power-lift function and a second

for power-tilt.

Power

Suffix

Motor Type

Motor Control

Ship Weight

Adder

-110

AC, 1HP/115V, TEFC Switch, Cord, Plug

75 Lb. (34 kg)

-114

Air, Vane Type

On/Off Valve

95 Lb. (43 kg)

-115

DC, 12V

Built-in

120 Lb. (54.4 kg)

Electric Power Lift & Tilt

Hold momentary switch and lift

valve to raise drum. Use second

valve to control the hydraulically

driven drum tilt. Lower the drum

with manual release valve.

Air Power Lift and Tilt

Hold on/off valve and lift valve to

raise the drum. Use a second

valve to control the hydraulically

driven drum tilt. Lower the drum

with manual release valve. Air

motor requirements: 40 to 60

PSI at 40 SCFM.

Battery Power Lift and Tilt

Hold momentary switch and lift

valve to raise drum. Use 2nd

valve to control drum tilt. Lower

drum with manual release valve.

Charger is included.

Bracket

Assembly

NOTE: 12V Deep Cycle Lead Acid Battery is designed for domestic shipment only. For export shipment,

choose the following battery option:

•

Option “NB” No Battery. Customer must obtain battery before use... Exide # 27MDP 12V Deep

Cycle Battery or equivalent.

Kit 4560B-P

We recommend the

MORStop Tilt-BrakeTM

on models with manual tilt.

It automatically holds the drum tilt

angle and prevents uncontrolled

turning, even when drum contents shift.

Option # 3900i-P

MORStop Tilt-BrakeTM

factory installed.

Web Strap with Ratchet

Option # 5115i-P

MORCINCHTM Drum Holder with Web

Strap and Ratchet option installed

(not for use on spark resistant models).

Power Lift Models with Manual Tilt

Power-Lift Models ease drum

lifting, but retain manual tilt

control. Hand crank tilt control

is on 60” (152 cm) lift height

units. Models with 106" (269

cm) lift heights have pull chain

and chain wheel tilt control.

Power

Suffix

Motor Type

Motor Control

Ship Weight

Adder

-120

AC, 1HP/115V, TEFC Switch, Cord, Plug

40 Lb. (18.1 kg)

-124

Air, Vane Type

On/Off Valve

25 Lb. (11.4 kg)

-125

DC, 12V

Built-in

85 Lb. (38.6 kg)

Electric Power Lift

Use switch to raise the drum.

Lower the drum with manual

release valve.

Air Motor Power Lift

Use on/off valve to raise the

drum. Lower the drum with

manual release valve. Air motor

Requirements: 40 to 60 PSI at

40 SCFM.

Battery Power Lift

Self contained battery power-

lift. Operate battery power

controls to raise and lower drum

Separate charger is included.

Existing manual lift models can be converted to power lift. Order Power-Lift Kit for “Field installation,”

such as O-120FILC-500, O-124FILC-500, or O-125FILC-500.