M41T81

Maximum rating

21/30

4

Maximum rating

Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the Operating sections of

this specification is not implied. Exposure to Absolute Maximum Rating conditions for

extended periods may affect device reliability. Refer also to the STMicroelectronics SURE

Program and other relevant quality documents.

Caution:

Negative undershoots below –0.3 volts are not allowed on any pin while in the Battery Back-

up Mode

Table 6.

Absolute maximum ratings

Sym

Parameter

Value

Unit

oscillator off)

SOIC

–55 to 125

°C

Supply voltage

–0.3 to 7

V

Lead solder temperature for 10

seconds

1.

For SO8 package, lead-free (Pb-free) lead finish: Reflow at peak temperature of 260°C (total thermal budget not to exceed 245°C for greater

than 30 seconds).

260

°C

Standard (SnPb)

2.

For SO8 package, standard (SnPb) lead finish: Reflow at peak temperature of 240°C (total thermal budget not to exceed 180°C for between

90 to 150 seconds).

240

°C

Input or output voltages

–0.3 to Vcc+0.3

V

Output current

20

mA

Power dissipation

1

W