www.ti.com

FEATURES

PORTABLE APPLICATIONS

DBV (SOT-23) PACKAGE

(TOP VIEW)

1

2

3

5

4

GND

ON/OFF

BYPASS

DESCRIPTION/ORDERING INFORMATION

LP2985

150-mA LOW-NOISE LOW-DROPOUT REGULATOR

WITH SHUTDOWN

SLVS522J – JULY 2004 – REVISED AUGUST 2006

•

Cellular Phones

•

Output Tolerance of

•

Palmtop and Laptop Computers

– 1% (A Grade)

•

Personal Digital Assistants (PDAs)

– 1.5% (Standard Grade)

•

Digital Cameras and Camcorders

•

Ultra-Low Dropout, Typically

•

CD Players

– 280 mV at Full Load of 150 mA

•

MP3 Players

– 7 mV at 1 mA

•

•

•

Shutdown Current . . . 0.01

µA Typ

•

Low Noise . . . 30

µV

Capacitor

•

Stable With Low-ESR Capacitors, Including

Ceramic

•

Overcurrent and Thermal Protection

•

High Peak-Current Capability

The LP2985 family of fixed-output, low-dropout regulators offers exceptional, cost-effective performance for both

portable and nonportable applications. Available in voltages of 1.8 V, 2.5 V, 2.8 V, 2.9 V, 3 V, 3.3 V and 5 V, the

family has an output tolerance of 1% for the A version (1.5% for the non-A version) and is capable of delivering

150-mA continuous load current. Standard regulator features, such as overcurrent and overtemperature

protection, are included.

The LP2985 has a host of features that makes the regulator an ideal candidate for a variety of portable

applications:

•

Low dropout: A PNP pass element allows a typical dropout of 280 mV at 150-mA load current and 7 mV at

1-mA load.

•

Low quiescent current: The use of a vertical PNP process allows for quiescent currents that are considerably

lower than those associated with traditional lateral PNP regulators.

•

Shutdown: A shutdown feature is available, allowing the regulator to consume only 0.01

µA when the

ON/OFF pin is pulled low.

•

Low-ESR-capacitor friendly: The regulator is stable with low-ESR capacitors, allowing the use of small,

inexpensive, ceramic capacitors in cost-sensitive applications.

•

Low noise: A BYPASS pin allows for low-noise operation, with a typical output noise of 30

µV

use of a 10-nF bypass capacitor.

•

Small packaging: For the most space-constrained needs, the regulator is available in the SOT-23 package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright © 2004–2006, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.