| 数据搜索系统,热门电子元器件搜索 |
|
L6730 数据表(PDF) 15 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6730 数据表(HTML) 15 Page - STMicroelectronics |
|
15 / 52 page ![]() L6730 - L6730B Device description 15/52 5.4 Internal and external references It is possible to set two internal references, 0.6V and 1.2V, or provide an external reference from 0V to 2.5V. The maximum value of the external reference depends on the VCC : with VCC = 4V the clamp operates at about 2V (typ.), while with VCC greater than 5V the maximum external reference is 2.5V (typ). ● VEAREF from 0% to 80% of VCCDR −> External reference ● VEAREF from 80% to 95% of VCCDR −> VREF = 1.2V ● VEAREF from 95% to 100% of VCCDR −> VREF = 0.6V Providing an external reference from 0V to 450mV the output voltage will be regulated but some restrictions must be considered: ● The minimum OVP threshold is set at 300mV. ● The under-voltage-protection doesn’t work. ● The PGOOD signal remains low. To set the resistor divider it must be considered that a 100K pull-down resistor is integrated into the device (see Figure 6.). Finally it must be taken into account that the voltage at the EAREF pin is captured by the device at the start-up when Vcc is about 4V. 5.5 Error amplifier Figure 6. Error Amplifier Reference 2.5V 100K EAREF VCCDR 0.6V 1.2V EXT Error Amplifier Ref. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |