Note:

The detection volume of Table 2. FoV angles has been measured with a white 88% reflectance perpendicular

target. This measurement was taken:

•

In full FoV

•

Located at 1 m from the sensor

•

Without ambient light (dark conditions)

•

With an 8x8 resolution

•

With a 14% sharpener (default value)

•

In continuous mode

•

At 15 Hz

2.3

Field of illumination

The VCSEL field of illumination (FoI) is shown in the figure below. The relative emitted signal power depends on

the FoI angle. It corresponds to:

•

43.4° x 43.4°, considering a beam with a 75% signal from the maximum.

•

57.9° x 57.9°, considering a beam with a 10% signal from the maximum.

Figure 2. VL53L8CH FoI

VL53L8CH

Field of illumination

DS14310 - Rev 3

page 5/44