FSP050(60/ 65)-DHAN3

Series

FEATURES

•

Meet IEC 62368-1 & IEC 60950-1

•

Meet Energy Efficiency DOE Level VI

•

Meet Code of Conduct Version 5 Tier 2

•

High Reliability

•

EMC Standard: EN55032/ EN55024 Class B

•

Over Current Protection

•

Over Temperature Protection

•

Over Voltage Protection

DESCRIPTION

This product is an watts AC to DC adapter intended for use in This product is an 50~65 watts AC to DC adapter intended for use in

IPC systems, embedded systems, IPC Systems, Embedded Systems, Printers, Monitors and POS Systems, etc. that have a high

wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets CISPR32 EN55032 CLASS B, EN55024 and

FCC PART 15B Class B emission limits, and is designed for ITE application.

INPUT SPECIFICATIONS

Input voltage:

Input frequency:

Input current:

No load power consumption

Touch current:

90-264 VAC

47-63 Hz

100Vac, 240Vac / full load ≦ 1.0A

115Vac , 230Vac ≦ 0.075W

264Vac / 50Hz ≦ 0.25mA

INPUT SPECIFICATIONS

Power factor:

Efficiency:

Power turn-on time

Hold-up time:

Inrush current:

Operating altitude:

Withstand voltage:

MTBF:

EMC Performance:

EN55032

FCC

VCCI

EN61000-3-2

EN61000-3-3

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

EN61000-4-6

EN61000-4-8

EN61000-4-11

Power de-rating:

N/A

See rating chart

At 100Vac / full load, output voltage shall remain

regulation ≦ 3Sec

At 100Vac or 240Vac / full load, output voltage shall

remain regulation ≧10ms

100Vac, 240Vac / full load , Shall be less than the rating

of adapter critical component (including rectifiers, fuse

surge and current limiting device)

5000 meters above sea level

Between AC input and secondary applied DC 4242V,test

time 1 minute,cut off current shall be less than 10mA

100Vac, 240Vac / full load , 300,000 hours at 25℃,

standard SR332

Class B conducted, class B radiated

Class B conducted, class B radiated

Class B conducted, class B radiated

Meet class A

Meet regulation

Air discharge: ±8 KV,contact discharge: ±4KV, meet

criterion A

80 ~1000 MHz,3V/m,80% AM(1kHz), meet criterion A

Impulse: ±1kV applied to L,N,meet criterion A

±1kV applied differential mode, ±2kV applied common

mode,meet criterion A

0.15 ~ 80 MHz,3Vrms,80% AM(1kHz),meet criterion A

50 Hz or 60Hz,1A/m,meet criterion A

Voltage Dips：

>95% reduction for 0.5 period,meet criterion B

30% reduction for 25 period,meet criterion C

Voltage Interruptions：

>95% reduction for 250 period,meet criterion C

100Vac or 240Vac, 0℃ to 40℃, 100% load, 50℃, 85%

load, 60℃, 70% load, 70℃, 55% load (Shall be less than

the rating of adapter critical component , follow FSP

specification (adapter))

OUTPUT SPECIFICATIONS

Output voltage/current:

Total output power:

Protection:

Over voltage:

Short circuit &

Over current:

Over temperature:

Brown-out

Environment

Working TEMP.

Storage TEMP.

Working Humidity

Storage Humidity

See rating chart

See rating chart

The adapter will enter into shut down

that means no output while over voltage

happened at output terminal that caused

by internal fault,the output trip voltage

shall not exceed 28 vlots.That will be

return to normal state by AC reset

When an internal fault occurs,or an

external fault is applied to the output,

the power suppy shall shut down and

enter auto-recovery mode.

The power supply will enter into shut

down while the abnormal thermal rise

occurs.That will be return to normal

state by AC reset.

Shutdown and no damage

0~70℃ (> 40℃ de-rating )

-20~+80℃

20~80% RH non-condensing

10~90% RH non-condensing

SAFETY STANDARD APPROVAL

1 ©2018FSPGroup.AllRightsReserved.Alltrademarksareregisteredtotheirrespectiveowners.

2018.12 spec

www.fsp-group.com.tw

TECHNICAL DATASHEET

50W ~ 65W 12V Adapter

FSP050(60/ 65)-DHAN3 Series

Tested to Comply

With FCC Standards

FOR HOME OR OFFICE USE