3

www.diodes.com

March 2021

Diodes Incorporated

PI3CSW12

Document Number DS42881 Rev 4-2

A Product Line of

Diodes Incorporated

PI3CSW12

VDD Supply Voltage Range ................................................. –0.5V to 4.6V

VIN Control Input Voltage Range(2, 3)................................... –0.5V to 5.5V

VI/O Switch I/O Voltage Range(2, 3, 4).................................... –0.5V to 5.5V

IIK Control Input Clamp Current (VIN < 0).................................... –50mA

II/OK I/O Port Clamp Current (VI/O < 0)......................................... –50mA

II/O ON-state Switch Current(5) ..................................................... ±120mA

Continuous Current through VDD or GND................................... ±100mA

θJA Package Thermal Impedance

TLLGA Package ..............................................................48.7°C/W

TDFN Package ................................................................. 243°C/W

Tstg Storage Temperature Range ............................................–65 to 150°C

Tj Junction Temperature ...................................................................125°C

Notes:

1. Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied.

Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

2. All voltages are with respect to ground, unless otherwise specified.

3. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

4. VI and VO are used to denote specific conditions for VI/O.

5. II and IO are used to denote specific conditions for II/O.

6. The package thermal impedance is calculated in accordance with JESD 51-7.

Absolute Maximum Ratings(1)

Over operating free-air temperature range (unless otherwise noted)

Recommended Operating Conditions(1)

Symbol

Description

Parameter

Min.

Max.

Unit

VDD

Supply voltage

2.3

3.6

V

VIH

High-level control input voltage

VDD = 2.3V to 2.7V

1.3

-

VDD = 2.7V to 3.6V

1.4

-

VIL

Low-level control input voltage

VDD = 2.3V to 2.7V

0.6

VDD = 2.7V to 3.6V

0.6

VI/O

Data input/output voltage

0

4.6

TA

Operating free-air temperature

–40

85

°C

Note:

1. All unused control inputs of the device must be held at VDD or GND to ensure proper device operation.