BB-1 SEALED PLUNGER (For use with P0 actuator option.)

BJ-1 OVERTRAVEL PLUNGER (For use with P0 actuator option.)

BB-2 SEALED PLUNGER (For use with PS sealed actuator option.)

BJ-2 OVERTRAVEL PLUNGER (For use with PS sealed actuator option.)

AUXILIARY ACTUATORS

L

C&K Hardware

L-7

www.ittcannon.com

ITT Industries

Cannon

Basic precision HB Series switches, with any terminal style, can be used with these attachable actuators. As supplied, the

actuator is not assembled to the switch; the switch must be ordered separately. The actuator can be assembled to the switch

before mounting, or the actuator can be mounted on the panel or chassis and the switch installed after wiring. Assembly screws,

nuts and lockwashers are furnished.

Actuator assembly sealed to mounting surface

by flexible boot and o-ring seal.

Provides up to .250 in. total travel; mounting

by threaded bushing or two screws.