Manual Motor Starters, Controllers, and Protectors

GV7 Accessories Selection

21

10/02

© 2001-2002 Schneider Electric All Rights Reserved

Direct Rotary Handle

The direct rotary handle replaces the starter front cover and is secured by screws (see the diagram

on page 20). It includes a device for locking the starter in the O (Off) position by a padlock. As many as

3 padlocks with a shank diameter of 5 to 8 mm (0.2 to 0.3 in) can be used. The padlocks are not

supplied. A conversion accessory allows the direct rotary handle to be mounted on an enclosure door.

In this case, the door cannot be opened if the starter is in the “tripped” position. Starter closing is

inhibited if the enclosure door is open. Refer to the diagram on page 20.

▲

This conversion accessory makes it impossible to open the door if the device is closed and prevents the device from being closed if the door is open.

Extended Rotary Handle

The extended rotary handle makes it possible to operate controllers installed in the back of an enclosure

from the front of the enclosure. Refer to the diagram on page 20.

It consists of the following:

— a unit which screws onto the front cover of the starter

— an assembly (handle and front plate) to be fitted on the enclosure door

— an extension shaft which must be adjusted – distance between the mounting surface and the

door: 185 mm (7.28 in) minimum, 600 mm (23.62 in) maximum

It includes a device for locking the starter in the O (Off) position by a padlock. As many as 3 padlocks

with a shank diameter of 5 to 8 mm (0.2 to 0.3 in) can be used. The padlocks are not supplied. This

prevents the enclosure door from being opened.

Locking Device

The locking device allows controllers without a rotary handle installed, to be locked in the O (Off) position

by a padlock. As many as 3 padlocks with a shank diameter of 5 to 8 mm (0.2 to 0.3 in) can be used.

The padlocks are not supplied. Refer to the diagram on page 20.

Description

Type

Catalog Number

Weight / kg (lbs)

Direct Rotary Handle

Black handle, black legend plate

GV7AP03

0.205 (0.45)

Red handle, yellow legend plate

GV7AP04

0.205 (0.45)

Conversion Accessory ▲

For mounting direct rotary handle on

enclosure door

GV7AP05

0.100 (0.22)

Description

Type

Catalog Number

Weight / kg (lbs)

Extended Rotary Handle

Black handle, black legend plate

GV7AP01

0.775 (1.71)

Red handle, yellow legend plate

GV7AP02

0.775 (1.71)

Description

Application

Catalog Number

Weight / kg (lbs)

Locking Device

For GV7 not fitted with a rotary

handle

GV7V01

0.100 (0.22)