ADCMP580/ADCMP581/ADCMP582

Rev. 0 | Page 6 of 16

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Rating

SUPPLY VOLTAGES

Positive Supply Voltage

−0.5 V to +6.0 V

Negative Supply Voltage

–6.0 V to +0.5 V

Logic Supply Voltage

−0.5 V to +6.0 V

INPUT VOLTAGES

Input Voltage

−3.0 V to +4.0 V

Differential Input Voltage

−2 V to +2 V

Input Voltage, Latch Enable

−2.5 V to +5.5 V

HYSTERESIS CONTROL PIN

−5.5 V to +0.5 V

Maximum Input/Output Current

1 mA

OUTPUT CURRENT

ADCMP580 (CML)

−25 mA

ADCMP581 (NECL)

−40 mA

ADCMP582 (PECL)

−40 mA

TEMPERATURE

Operating Temperature, Ambient

−40°C to +125°C

Operating Temperature, Junction

125°C

Storage Temperature Range

−65°C to +150°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only and functional operation of the device at these or

any other conditions above those indicated in the operational

sections of this specification is not implied. Exposure to

absolute maximum rating conditions for extended periods may

affect device reliability.

THERMAL CONSIDERATIONS

The ADCMP580/ADCMP581/ADCMP582 LFCSP 16-lead

resistance) of 70°C/W in still air.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.