®

LSN2 Series

Non-isolated, DOSA-SIP, 6/10/16A Selectable-Output DC/DC Converters

www.cd4power.com

PART NUMBER STRUCTURE

Model

Output

Input

Efficiency

Package

(Case/

Pinout)

(Volts)

(Amps)

Power

(Watts)

R/N (mVp-p)

➁

Regulation

➂

(Volts)

Range

➄

(Volts)

➃

(mA/A)

Typ.

Max.

Line

Load

Min.

Typ.

LSN2-T/6-W3

0.75-3.3

6

19.8

15

25

±0.3%

±0.3%

5

2.4-5.5

50/4.22

92%

94%

B12, P69

LSN2-T/6-D12

0.75-5

6

19.8

15

25

±0.3%

±0.3%

12

8.3-14

70/2.69

90%

93%

B12, P69

LSN2-T/10-W3

0.75-3.3

10

33.0

15

25

±0.3%

±0.3%

5

2.4-5.5

50/6.95

93%

95%

B11, P68

LSN2-T/10-D12

0.75-5

10

33.0

30

75

±0.3%

±0.3%

12

8.3-14

100/4.39

93%

95%

B11, P68

LSN2-T/16-W3

0.75-3.3

16

52.8

25

50

±0.3%

±0.3%

5

2.4-5.5

50/11.12

93%

95%

B11, P68

LSN2-T/16-D12

➅

0.75-5

16

52.8

30

75

±0.3%

±0.3%

12

8.3-14

100/7.1

92%

94%

B11, P68

Maximum Rated Output

Current in Amps

Non-Isolated SMT

Output Configuration:

L = Unipolar

Low Voltage

Nominal Output Voltage:

0.75-3.3 Volts (W3)

0.75-5 Volts (D12)

/

D12

-

T 16

N G

Input Voltage Range:

D12 = 8.3-14 Volts (12V nominal)

W3 = 2.4-5.5 Volts (5V nominal)

On/Off Polarity:

Blank = Positive polarity

N = Negative polarity

Power Good Output:

Blank = Omitted

G = Installed

models are tested and specified with external 22μF tantalum input and output capacitors.

These capacitors are necessary to accommodate our test equipment and may not be required

to achieve specified performance in your applications. See I/O Filtering and Noise Reduction.

➁ Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with

external filtering. See I/O Filtering and Noise Reduction for details.

➂ These devices have no minimum-load requirements and will regulate under no-load

conditions. Regulation specifications describe the output-voltage deviation as the line voltage

or load is varied from its nominal/midpoint value to either extreme.

➃ Nominal line voltage, no-load/full-load conditions.

Note:

Not all model number combinations are

available. Contact C&D Technologies (DATEL).

C

RoHS-6 compliant*

-

*Contact C&D Technologies (DATEL)

for availability.