www.apexanalog.com

Subject to Change

© Apex Microtechnology Inc.

All rights reserved

May 2020

EK76U Rev A

Evaluation Kit

EK76

APPLICABLE PARTS (SOLD SEPARATELY)

• SA310KR

INTRODUCTION

This kit contains everything needed for rapid prototyping with the SA310KR 3-phase driver. With a multi-

tude of circuit options, the EK76 offers versatility when in comes to connecting inputs, measuring outputs,

and conditioning signals to the specific application environment. High- and low- input signals for each phase

may be supplied from any 3 V to 18 V digital controller via standard pin header or SMA connectors. A remov-

able 50 Ω termination resistor is offered for impedance-matched inputs. Coaxial measurement points are

offered for high-fidelity waveform measurement, so erroneous overshoot/ringing are cut down to a mini-

mum. The layout is carefully optimized for signal and power transmission, while permitting easy integration

with system controllers and 3-phase loads.

ABSOLUTE MAXIMUM RATINGS

All specifications listed in the SA310 datasheet apply to this board, except as noted below. This board

uses components that limit SA310's full operating range in exchange for convenience to the customer.

Parameter

Symbol

Max

Units

Limited By

Output Current, continuous, within SOA

IOUT

20

A

DUT-socket

Power Dissipation, SA310

PD

60

W

DUT-HS