07/26/2016

216558 - HPL-ED2016 V24.0 EN

2 / 3

Contacts

Rated impulse withstand voltage

Uimp

V AC

6000

Rated insulation voltage

Ui

V

500

Overvoltage category/pollution degree

 

 

III/3

Indoor and protected outdoor installation

Design￿verification￿as￿per￿IEC/EN￿61439

Technical data for design verification

 

 

 

Rated operational current for specified heat dissipation

In

A

0

Heat dissipation per pole, current-dependent

Pvid

W

0

Equipment heat dissipation, current-dependent

Pvid

W

0

Static heat dissipation, non-current-dependent

Pvs

W

0.45

Heat dissipation capacity

Pdiss

W

0

Operating ambient temperature min.

 

°C

-25

Operating ambient temperature max.

 

°C

70

IEC/EN 61439 design verification

 

 

 

10.2 Strength of materials and parts

 

 

 

10.2.2 Corrosion resistance

 

 

Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures

 

 

Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat

 

 

Meets the product standard's requirements.

10.2.3.3 Verification of resistance of insulating materials to abnormal heat

and fire due to internal electric effects

 

 

Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation

 

 

Meets the product standard's requirements.

10.2.5 Lifting

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions

 

 

Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

 

 

Meets the product standard's requirements.

10.5 Protection against electric shock

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

 

 

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

 

 

Is the panel builder's responsibility.

10.8 Connections for external conductors

 

 

Is the panel builder's responsibility.

10.9 Insulation properties

 

 

 

10.9.2 Power-frequency electric strength

 

 

Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage

 

 

Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material

 

 

Is the panel builder's responsibility.

10.10 Temperature rise

 

 

The panel builder is responsible for the temperature rise calculation. Eaton will

provide heat dissipation data for the devices.

10.11 Short-circuit rating

 

 

Is the panel builder's responsibility. The specifications for the switchgear must be

observed.

10.12 Electromagnetic compatibility

 

 

Is the panel builder's responsibility. The specifications for the switchgear must be

observed.

10.13 Mechanical function

 

 

The device meets the requirements, provided the information in the instruction

leaflet (IL) is observed.

Technical￿data￿ETIM￿6.0

Low-voltage industrial components (EG000017) / Lamp holder block for control circuit devices (EC000204)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Bulb socket block for command and alarm devices

(ecl@ss8.1-27-37-12-09 [AKF027011])

With integrated transformer

 

 

No

With integrated voltage decreasing resistor

 

 

No

With integrated lamp

 

 

Yes

With integrated diode

 

 

Yes

Lamp holder

 

 

None

Rated voltage Ue at AC 50 Hz

 

V

0 - 0

Rated voltage Ue at AC 60 Hz

 

V

0 - 0

Rated voltage Ue at DC

 

V

30 - 30