LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD

GENERALPURPOSE, LOW VOLTAGE, LOW POWER, RAILTORAIL OUTPUT

OPERATIONAL AMPLIFIERS

SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005

3

POST OFFICE BOX 655303

LPV324 simplified schematic

VBIAS4

−

+

−

+

IN+

IN−

VBIAS1

VBIAS2

VBIAS3

−

+

−

+

Output

VCC

VCC

VCC

VCC

5.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

206

°C/W

. . . . . . . . . . . . . . . . . . .

5-pin DCK package

252

°C/W

. . . . . . . . . . . . . . . . . . .

8-pin D package

97

°C/W

. . . . . . . . . . . . . . . . . . . . . . .

8-pin DDU package

TBD

°C/W

. . . . . . . . . . . . . . . . . .

8-pin DGK package

172

°C/W

. . . . . . . . . . . . . . . . . . .

14-pin D package

86

°C/W

. . . . . . . . . . . . . . . . . . . . . .

14-pin PW package

113

°C/W

. . . . . . . . . . . . . . . . . . .

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages and VCC specified for the measurement of IOS, are with respect to the network GND.

2. Differential voltages are at IN+ with respect to IN−.

3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability.

4. The package thermal impedance is calculated in accordance with JESD 51-7.