TL061, TL061A, TL061B, TL062, TL062A

TL062B, TL064, TL064A, TL064B

LOW POWER JFET INPUT OPERATIONAL AMPLIFIERS

SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004

5

POST OFFICE BOX 655303

TL06_C

TL06_AC

TL06_BC

TL06_I

TL06_M

UNIT

Supply voltage, VCC+ (see Note 1)

18

18

18

V

Supply voltage, VCC− (see Note 1)

−18

−18

−18

V

Differential input voltage, VID (see Note 2)

±30

±30

±30

V

Input voltage, VI (see Notes 1 and 3)

±15

±15

±15

V

Duration of output short circuit (see Note 4)

Unlimited

Unlimited

Unlimited

D (8-pin) package

97

97

D (14-pin) package

86

86

N package

80

80

NS package

76

76

Package thermal impedance,

θJA (see Notes 5 and 6)

P package

85

85

°C/W

Package thermal impedance, JA (see Notes 5 and 6)

PS package

95

95

C/W

PW (8-pin) package

149

149

PW (14-pin)

package

113

113

FK package

5.61

Package thermal impedance,

θJC (see Notes 7 and 8)

J package

15.05

°C/W

Package thermal impedance,

θJC (see Notes 7 and 8)

JG package

14.5

°C/W

W package

14.65

Operating virtual junction temperature, TJ

150

150

150

°C

Case temperature for 60 seconds

FK package

260

°C

Lead temperature 1,6 mm (1/16 inch) from case for 60

J, JG, U, or

300

°C

Lead temperature 1,6 mm (1/16 inch) from case for 60

seconds

J, JG, U, or

W package

300

°C

Lead temperature 1,6 mm (1/6 inch) from case for 10

D, N, NS, P, PS,

260

260

°C

Lead temperature 1,6 mm (1/6 inch) from case for 10

seconds

D, N, NS, P, PS,

or PW package

260

260

°C

Storage temperature range, Tstg

−65 to 150

−65 to 150

−65 to 150

°C

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values except differential voltages are with respect to the midpoint between VCC+ and VCC−.

2. Differential voltages are at IN+ with respect to IN−.

3. The magnitude of the input voltage should never exceed the magnitude of the supply voltage or 15 V, whichever is less.

4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the

dissipation rating is not exceeded.

5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

6. The package thermal impedance is calculated in accordance with JESD 51-7.

7. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) − TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

8. The package thermal impedance is calculated in accordance with MIL-STD-883.