AM29PL160CB-70REF datasheet(27/44 Pages) AMD

27 / 44 page

May 9, 2006 22143C7

Am29PL160C

D A TA

SH EE T

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . -65°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . -65°C to +125°C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V

A9 and OE# (Note 2) . . . . . . . . . . –0.5 V to +13.0 V

All other pins (Note 1). . . . . . . . . . . –0.5 V to +5.5 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During

voltage transitions, input at I/O pins may overshoot VSS to

-2.0 V for periods of up to 20 ns. Maximum DC voltage on

output and I/O pins is VCC + 0.5 V. During voltage

transitions output pins may overshoot to VCC + 2.0 V for

periods up to 20 ns.

2. Minimum DC input voltage on pins A9 and OE# is –0.5 V.

During voltage transitions, A9 and OE# may overshoot

VSS to -2.0 V for periods of up to 20 ns. Maximum DC

input voltage on pin A9 and OE# is +13.0 V which may

overshoot to 14.0 V for periods up to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

4. Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device.

This is a stress rating only; functional operation of the de-

vice at these or any other conditions above those indi-

cated in the operational sections of this data sheet is not

implied. Exposure of the device to absolute maximum rat-

ing conditions for extended periods may affect device re-

liability.

OPERATING RANGES

Commercial (C) Devices

Ambient Temperature (TA) . . . . . . . . . . . 0°C to +70°C

Industrial (I) Devices

Ambient Temperature (TA) . . . . . . . . . –40°C to +85°C

VCC Supply Voltages

VCC for regulated voltage range. . . . . . . 3.0 V to 3.6 V

VCC for full voltage range . . . . . . . . . . . . 2.7 V to 3.6 V

Operating ranges define those limits between which the func-

tionality of the device is guaranteed.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

Figure 5.

Maximum Negative

Overshoot Waveform

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Figure 6.

Maximum Positive

Overshoot Waveform

AM29PL160CB-70REF 数据表(PDF) 27 Page - Advanced Micro Devices

AM29PL160CB-70REF 数据表(HTML) 27 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

数据表下载

链接网址

AM29PL160CB-70REF 数据表(PDF) 27 Page - Advanced Micro Devices

AM29PL160CB-70REF 数据表(HTML) 27 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

数据表 下载

链接网址

数据表下载