NO.

PQ24-101E

Product Specification and Approval Sheet Version 1 Page 4/4

Designed and manufactured by Fuzetec Technology Co., Ltd., offered by RFE International, Inc.

NOTE: Specification subject to change without notice.

2021/03/25

7. Material Specification

Lead material: FRV005-240F~FRV016-240F Tin plated copper clad steel, 24AWG.

Lead material: FRV025-240F~FRV040-240F Tin plated copper, 22AWG.

Lead material: FRV055-240F~FRV200-240F Tin plated copper, 20AWG.

Soldering characteristics: MIL-STD-202, Method 208E.

Insulating coating: Flame retardant epoxy, meets UL-94V-0 requirement.

8. Part Numbering and Marking System

Part Numbering System

Part Marking System

F R V □ □ □ - □ □ □ F

Note: Font on Marking may look slightly different due to fine turnings of each Marking printer.

Warning: - Each product should be carefully evaluated and tested for their suitability of application.

- Operation beyond the specified maximum rating or improper use may result in damage and possible

electrical arcing and/or flame.

- PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent

condition and/or prolonged trip are not anticipated.

- Avoid contact of PPTC device with chemical solvent, including some inert material such as silicone based

oil, lubricant and etc. Prolonged contact will damage the device performance.

- Additional protection mechanism are strongly recommended to be used in conjunction with the PPTC

device for protection against abnormal or failure conditions.

- Avoid use of PPTC device in a constrained space such as potting material, housing and containers where

have limited space to accommodate device thermal expansion and/or contraction.

Current Rating

F

Fuzetec Logo

RV □ □ F

□ □ □ □

Part Identification

RoHS Compliant / Lead Free

RoHS Compliant / Lead Free

Voltage Rating

F

RV12F

91AB

Example

Date Code / Lot Number

Product Family