NO.

PQ40-01E

Product Specification and Approval Sheet Version 1 Page 3/4

Designed and manufactured by Fuzetec Technology Co., Ltd., offered by RFE International, Inc.

NOTE: Specification subject to change without notice.

2021/04/07

F030

100

33

6. Typical Time-to-Trip at 23℃

0.001

0.01

0.1

1

10

100

0.1

1

10

100

Fault current (A)

A

B C D E FG

7. Material Specification

Terminal pad material: Pure Tin

Soldering characteristics: Meets EIA specification RS 186-9E, ANSI/J-std-002 Category 3

8. Part Numbering and Marking System

Part Numbering System

Part Marking System

F S M D □ □ □ – 2016 R

F S M D □ □ □ – 2016 – R

F S M D □ □ □ – □ □ – 2016 – R

Warning: - Each product should be carefully evaluated and tested for their suitability of application.

- Operation beyond the specified maximum rating or improper use may result in damage and possible electrical arcing and/or flame.

- PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged

trip are not anticipated.

- Avoid contact of PPTC device with chemical solvent, including some inert material such as silicone based oil, lubricant and etc.

Prolonged contact will damage the device performance.

- Additional protection mechanism are strongly recommended to be used in conjunction with the PPTC device for protection against

abnormal or failure conditions.

- Avoid use of PPTC device in a constrained space such as potting material, housing and containers where have limited space to

accommodate device thermal expansion and/or contraction.

Current Rating

□ □ □

F

Fuzetec Logo

A = FSMD030-2016-R

B = FSMD050-2016R

C = FSMD075-2016R

D = FSMD100-2016-R

E = FSMD100-33-2016-R

F = FSMD150-2016-R

G = FSMD200-2016-R

F

Part Identification

□ □ □

F

□ □

Part Identification

Fuzetec Logo

Voltage Rating

Current Rating

Example

Example