TP-SW3G-WT

TP-SW3G-WT Spec Rev 1 12-May-20

Specifications Subject to Change Without Notice

Page 2

Specifications

TP-SW3G-WT

Ports

1 data/PoE input and 2 data/PoE outputs, automatic crossover and polarity

Transmission Speed

1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation

Connections

Shielded RJ45, Grounded to FG

Wire Terminal DC Input

Vin 44VDC to 57VDC, 2 connections for convenience, FG = Frame/Chassis Ground

PoE Input Port (Uplink)

Vin 44VDC to 57VDC 90W, 2 Pair or 4 Pair +/- Power

PoE Output Ports (1-2)

Vout 42VDC to 55VDC, Pin assignment: V+(4,5) V-(7,8)

PoE Output Power (1-2)

35W per port Maximum, 70W Total

POE Compatibility

Ports 1-2 = IEEE802.3af (PoE), IEEE802.3at (PoE+),

Uplink Port = 802.3bt or POE++ or High PoE 4 Pairs (90W) or 2 pairs 802.3af/at or Passive Poe

POE Protections

Over Temperature, Over Current, Short Circuit

Surge Protection

IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)

IEC61000-4-4 (EFT) 40A (5/50ns)

Self Consumption

< 5 Watt Typical

LED’s

1000Mbps Link (Green On), Activity (Green Blinking)

10/100Mbps Link (Yellow On), Activity (Yellow Blinking)

Port 1-2 PoE Detect (Yellow On)

Uplink PoE Detect (Yellow On = 4 Pair Power) (Yellow Blinking = 2 Pair Power)

Switch Technology

Store and Forward

Protocol

CSMA/CD

Flow Control

IEEE802.3x(full-duplex), Back Pressure(half-duplex)

Data Transmission Rate

1488000pps , 148800pps, 14880pps

Address Table

1K MAC, self-learning

Operating Temp

-30 to +70°C (-22 to 140°F)

Operating Humidity (RH)

5% - 90% (non condensing)

Storage Temperature

-40 to +85°C (-40 to +185°F)

Dimensions (LxWxH)

118 x 90 x 40mm (4.7 x 3.5 x 1.6

”)

Weight

210g (7.4oz)

Warranty

3 Years

System Ordering:

TP-SW3G-WT

3 Port 802.3af/at Gigabit PoE Switch

– PoE / Ethernet Extender

For further information contact:

•

Tycon Power Systems POE Switches carry a 1 year warranty

Tyconsystems.com

14641 S 800 W Ste A

Bluffdale, UT 84065

PH: 801-432-0003

FAX: 801-618-4220