TP-SW3G

TP-SW3G Spec Rev 2 30-Jan-18

Specifications Subject to Change Without Notice

Page 2

Specifications

TP-SW3G

Ports

1 data/PoE input and 2 data/PoE outputs, automatic crossover and polarity

Transmission Speed

1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation

Connections

Shielded RJ45, Grounded to case

PoE Input Port

Vin 44VDC to 57VDC, PoE Pinout: 1,2(V-); 3,6(V+) and/or 7,8(V-); 4,5(V+)

PoE Output Ports

Vout 42VDC to 55VDC, Pin assignment: V-(1,2), V+(3,6)

PoE Output Power

30W per port Maximum, 60W Total

POE Compatibility

IEEE802.3af (PoE), IEEE802.3at (PoE+), 802.3at 4 Pairs (60W) High PoE

POE Protections

Over Temperature, Over Current, Short Circuit

Surge Protection

IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)

IEC61000-4-4 (EFT) 40A (5/50ns)

Self Consumption

< 1.5 Watt Typical

LED’s

Link (Green On), Activity (Green Blinking ), PoE Detect (Yellow On)

Switch Technology

Store and Forward

Protocol

CSMA/CD

Flow Control

IEEE802.3x(full-duplex), Back Pressure(half-duplex)

Data Transmission Rate

148800pps ,14880pps

Address Table

1K MAC, self-learning

Operating Temp

-30 to +60°C (-22 to 140°F)

Operating Humidity (RH)

5% - 90% (non condensing)

Storage Temperature

-40 to +85°C (-40 to +185°F)

Dimensions (LxWxH)

119 x 85 x 28mm (4.7 x 3.3 x 1.1

”)

Weight

280g (9.9oz)

Warranty

3 Years

Typical Application:

System Ordering:

TP-SW3G

3 Port 802.3af/at Gigabit PoE Switch

– PoE / Ethernet Extender

For further information contact:

•

Tycon Power Systems POE Switches carry a 1 year warranty

Tyconsystems.com

14641 S 800 W Ste A

Bluffdale, UT 84065

PH: 801-432-0003

FAX: 801-618-4220