CO2 Analyser PCE-HT 422

CO2 Analyser for temperature, relative humidity, CO2, TVOC and light intensity / 4GB memory / Power over Ethernet / MQTT / Email

alarm / HTTP / FTP

The CO2 analyser is used to measure and store environmental data such as temperature, humidity, illuminance, CO2 content and TVOC

concentration. The data logger also calculates the dew point, absolute humidity and the water vapor content in the air. The climate data logger

is used for stationary monitoring of laboratories, greenhouses, medicine and food stores, museums, etc. The data measured and calculated by

the data logger are stored in the internal memory and can be called up via Ethernet and sent to the user. In addition to storing the

measurement data, the climate data logger can send alarms by email or display them on a website. The data logger can be supplied via a

power supply unit or autonomously via Power over Ethernet. An internal battery is built into the climate data logger to buffer the memory and

the settings.

In addition to the built-in Ethernet interface, the data logger also has an RS485 interface available to the user. This can be addressed via

Modbus RTU. The user can communicate with the climate data logger via Modbus TCP / IP, HTTP, FTP via the Ethernet interface. A web and FTP

server as well as a DHCP and SMTP client complete the functionality of the data logger's network interface.

 

Temperature measuring range (-20 ... +60 °C)

Relative humidity measuring range (0 ... 95%)

CO2, TVOC and light measurement

Ethernet interface (PoE compatible)

Alarm (acoustic, email, visual)

4 GB memory

Adjustable sampling / storage rate

FTP, HTTP server