Clamp Meter PCE-DC 41

Clamp Meter PCE-DC 41

Voltage metering up to 600 V / current metering up to 600 A / CAT III 600 V

Electrical resistance metering up to 1000 Ω / contact-free measuring of electrical conductors

The clamp meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a

measurement, you can either use the measuring leads, which are included in the package of the clamp meter, or you can use the integrated

clamp mechanism. By using the clamp of the clamp meter, you are able to measure the electrical parameters of an electrical conductor

contact-free and without disconnecting it.You can also check the continuity with the clamp meter.

Due to its compact design and light weight, the device is well-suited for mobile use. When using the clamp mechanism, it is also possible to

run the clamp meter with one hand only. The measured data is shown on the large backlit 4-digit display. By using the peak-hold or data-hold

function, you can also freeze the readings on the display. The auto power-off function saves battery power, when the device is not in use.

Voltage: 600 V AC/DC

Current: 600 A AC/DC

Electrical Resistance: 1000 Ω

Clamp mechanism

Continuity check

Peak- and data-hold function

Measuring leads included in the package

4-digit display

Display backlight

Auto power-off