PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@pce-instruments.com

www.pce-instruments.com/english

www.pce-instruments.com

Technical Light Meter PCE-LED 20

PCE-LED 20 LED Light Meter

Handheld lux meter with automatic range selection, displays measuring units in lux or

footcandle

PCE-LED 20 is a light meter with an external LED light sensor. The cable of the sensor has an extended

length of approx. 1.5 meters or 4.92 feet. Different work or production processes require different lighting

conditions. In school, office and factory environments, lighting must also meet applicable safety standards.

Indoor lighting conditions can be assessed quickly and easily using this meter. The LED light meter or lux

meter can display measured values directly on the display. A direct measurement is thus immediately

possible. By means of various presets, the functions installed in the device can also be activated or

deactivated. These functions include the normal HOLD function, in which the measured value is frozen in

the display. In addition, the extreme values as well as the average value can be frozen in the display.

Further functions of the LED lux meter are the zero adjustment, the automatic shutdown and the automatic

range selection.

Measurements are possible with the LED lux meter in lux or footcandle. The unit has only seven keys,

allowing for one-hand operation. This also makes the instrument simple to use. The LED lux meter is a

battery-powered handset, making the device portable and ideal for measurements in the field.

The measuring sensor of the LED lux meter has a large exposure area. For convenience, the sensor is

located on a coiled cable that can be extended to full length only when needed. A protective cap on the

sensor prolongs its life. This protective cap should be placed on the sensor during storage. In addition, the

protective cap is required when a zero adjustment is to be performed on the LED lux meter.

- Displays measurements in lux or footcandle

- Battery status indicator

- Battery-saving automatic power off

- Overload indicator

- Wired sensor cable length of 1.5 m or 4.92 ft

- MIN / MAX / AVG / HOLD functions

- 2.5 measurements per second

- Zero adjustment

- Automatic range selection