MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.

M3R Series

9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator

94

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see

M3R Series

9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator

Pin Connections

NOTE: A capacitor of value 0.01

µF or greater between Vdd and

Ground is recommended.

1. See load circuit diagram #2 on page 116.

2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load.

3. TTL output drive capability is 2 TTL (10 LS - TTL).

NOTE: A capacitor of value

0.01 mF or greater between Vdd

and Ground is recommended.

Revision: 12-06-06

Pin Connections

94

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see

M3R Series

9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator

Pin Connections

NOTE: A capacitor of value 0.01

µF or greater between Vdd and

Ground is recommended.

1. See load circuit diagram #2 on page 116.

2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load.

3. TTL output drive capability is 2 TTL (10 LS - TTL).

94

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see

M3R Series

9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator

Pin Connections

NOTE: A capacitor of value 0.01

µF or greater between Vdd and

Ground is recommended.

1. See load circuit diagram #2 on page 116.

2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load.

3. TTL output drive capability is 2 TTL (10 LS - TTL).

94

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see

M3R Series

9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator

Pin Connections

NOTE: A capacitor of value 0.01

µF or greater between Vdd and

Ground is recommended.

1. See load circuit diagram #2 on page 116.

2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load.

3. TTL output drive capability is 2 TTL (10 LS - TTL).