DM0 MixRack Getting Started Guide

10

AP10972 Issue 3

5.3 ME system connection

Plug a touring grade CAT5e (or higher specification) cable up to 100m long between the MixRack ME port

and the ME-1 or ME-U.

 Refer to www.allen-heath.com for cable requirements, recommendations, and a list

of CAT5 cables available to order.

5.4 Connect a laptop or wireless router

Connect a laptop, router or access point to either of the Network ports to use with dLive Editor or iOS apps.

Read the Release Notes and Help Files accompanying the software or apps for further information.

 dLive communicates over TCP/IP. All devices on the network including the MixRack

and Surface must have compatible IP addresses. Factory defaults are:

MixRack

192.168.1.70

Surface

192.168.1.71

Subnet Mask

255.255.255.0

Gateway

192.168.1.254

For direct, wired laptop connections, set your laptop to a static, compatible IP

address, for example 192.168.1.10.

For wireless connections, set your router / access point to a compatible IP address,

for example 192.168.1.254, and its DHCP range to a compatible range of addresses,

for example 192.168.1.100 to 192.168.1.200. Set any wireless laptop or mobile device

to DHCP / ‘obtain an IP address automatically’.