Datasheet revision 1.1

www.chipquik.com

Aluminum Solder Paste Water-Soluble Sn96.5/Ag3.5 T3 (10g syringe)

Product Highlights

Used for soldering Aluminum to Aluminum, Aluminum to

Copper, Aluminum to Brass, Aluminum to plated terminals

Printing speeds up to 100mm/sec

Long stencil life

Wide process window

Compatible with enclosed print heads

RoHS 3 and REACH compliant

Specifications

Alloy:

Sn96.5/Ag3.5

Mesh Size:

T3

Micron (µm) Range:

25-45

Flux Type:

Synthetic Water-Soluble

Flux Classification:

ROM1 (Water Soluble, Must be cleaned off post-use using Hot Water (60°C+) or IPA)

Metal Load:

75% Metal by Weight

Melting Point:

221°C (430°F)

Packaging:

5cc/10g Syringe

Shelf Life:

Refrigerated >12 months, Unrefrigerated >6 months *See notes below:

*Shelf Life Notes: Chip Quik® solder paste is good past its quoted shelf life, regardless of refrigeration. Before use, visually

inspect the solder paste to ensure it is not dried out or clumpy, or check stencil release. If stored in a jar, stir the product

thoroughly for 2-3 minutes before inspection and use.

Chip Quik® solder paste is manufactured using Made in USA high quality synthetic flux and precision atomized metal

powder. Chip Quik® solder paste is guaranteed for 12 months from date of manufacture, regardless of refrigeration. If you

have any issues with our solder paste, please contact Chip Quik® directly for no charge warranty replacement. Please retain

original bill of sale, and solder paste in original container as we may request its return for internal R&D testing purposes.

Printer Operation

Print Speed: 25-100mm/sec

Squeegee Pressure: 70-250g/cm of blade

Under Stencil Wipe: Once every 10-25 prints, or as necessary

Stencil Life

>12 hours @ 20-50% RH 22-28°C (72-82°F)

>4 hours @ 50-70% RH 22-28°C (72-82°F)

Stencil Cleaning

Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).

Storage and Handling

Refrigerate at 3-8°C (37-46°F). Do not freeze. Allow 4 hours for solder paste to reach an operating temperature of 20-25°C

(68-77°F) before use.

Transportation

This product has no shipping restrictions. Shipping below 0°C (32°F) or above 25°C (77°F) for normal transit times by ground

or air will not impact this product’s stated shelf life.

1

© 1994-2023 Chip Quik® Inc.

S

SM

MD

DA

AL

L