| 数据搜索系统,热门电子元器件搜索 |
|
ACT88321 数据表(PDF) 1 Page - Qorvo, Inc |
|
|
|||||||||||||||||||||||||||||
ACT88321 数据表(HTML) 1 Page - Qorvo, Inc |
|
1 / 55 page ![]() ACT88321 Advanced PMIC with 3 Bucks, 2 LDOs, and Load Bypass Switches Datasheet Rev. D, June 17, 2022 | Subject to change without notice 1 of 55 www.qorvo.com ® BENEFITS and FEATURES • Wide input voltage range • Vin = 2.7V to 5.5V • Complete integrated power solution • 4A DC/DC Step-Down (Buck) Regulator with By- pass Function • 4A DC/DC Step-Down (Buck) Regulator • 2A DC/DC Step-Down (Buck) Regulator • Two 390mA LDOs • Space Savings • Fully integrated • High Fsw = 1.125MHz to 3.3MHz • Works with 0.47µH Inductor • Integrated sequencing • Easy system level design • Configurable Sequencing • Multiple Wake up Triggers with GPIOs • Seamless Sequencing of External Supplies • Four Programmable GPIOs • Buck 1 Bypass Mode for 3.3V system level compliance • Highly configurable • uP interface for status reporting and controllability • Programmable Reset and Power Good GPIO’s • Flexible Sequencing Options • Multiple Sleep Modes • I2C Interface – 1MHz APPLICATIONS • Solid-State Drives (SSD) • FPGA • Computer Vision • Portable Audio / Video GENERAL DESCRIPTION The ACT88321 PMIC is an integrated ActiveCiPSTM power management integrated circuit. It powers a wide range of processors, including solid-state drive applica- tions, video processors, FPGA’s, wearables, periph- erals, and microcontrollers. The ACT88321 is optimized for SSD and FPGA applications. A similar product, ACT88328, is optimized for video and wearables appli- cations. The ACT88321 is highly flexible and can be re- configured via I2C for multiple applications without the need for PCB changes. The low external component count and high configurability significantly speeds time to market. Examples of configurable options include output voltage, startup time, slew rate, system level se- quencing, switching frequency, sleep modes, operating modes etc. ACT88321 is programmed at the factory with a default configuration. These settings can be opti- mized for a specific design through the I2C interface. The ACT88321 is available in several default configura- tion. Contact the factory for specific default configura- tions. The core of the device includes three DC/DC step down converters using integrated power FETs, two low-drop- out regulators (LDOs). Buck1 and LDO1 can be config- ured as a load switch. Buck1 is a peak current mode, fixed frequency DC-DC step down converter that is op- timized for output voltage closes to the input voltage. Buck1 switches at either 1.125MHz or 2.25MHz, requir- ing only three small components for operation. Buck2 and Buck3 use an asynchronous constant on-time, ACOT, control architecture to optimize the load transi- ent response with smaller output capacitors. The LDOs only require small ceramic capacitors. All outputs are highly configurable via the I2C interface. The ACT88321 PMIC is available in a 2.18 x 2.58 mm 30 ball WLCSP package. |
类似零件编号 - ACT88321 |
|
类似说明 - ACT88321 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |