CONTACT US

651-653-7000

800-553-6418

InverterInfo@sensata.com

Power Conversion

www.magnum-dimensions.com

Page 3

Rev: 07/20/19 Part#64-0665 vC

Copyright © 2019 Sensata Technologies, Inc.

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that

incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible

for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have

been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that

specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements,

improvements and other changes to its data sheets or components without notice.

Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO

OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND

NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS

ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE

OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS

ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET

ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD

TO SENSATA DATA SHEETS OR USE THEREOF.

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY

FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY

RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS,

AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION

OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.

www.sensata.com

PHYSICAL SPECIFICATIONS

Dimensions (L x W x H)

6.9” x 7.9” x 3.4”

[17.5cm x 20.1cm x

8.6cm]

12.63” x 7.0” x 3.5”

[32.1cm x 17.8cm x

8.9cm]

16.3” x 9.1” x 4.3”

[41.4cm x 23.1cm x

10.9cm]

17” x 9” x 4.5”

[43.2cm x 22.9cm x

11.4cm]

Shipping dimensions (L x W x H)

7.9” x 6.9” x 3.5”

[20.1cm x 17.5cm x

8.9cm]

15.5” x 8.75” x 5.63”

[39.2cm x 22.3cm x

14.3cm]

19” x 11.3” x 6.7”

[48.3cm x 28.7cm x

17cm]

19” x 11.3” x 6.7”

[48.3cm x 28.7cm x

17cm]

Mounting

Shelf [top or bottom up] or bulkhead

Weight

3.8 lb [1.7 kg]

6.6 lb [3.0 kg]

11.5 lb [5.2 kg]

13.0 lb [5.9 kg]

Shipping weight

4 lb [1.8 kg]

7.5 lb [3.4 kg]

13 lb [5.9 kg]

14.1 lb [31 kg]

Operating temperature

-0°C to +40°C [32°F to 104°F]

Nonoperating temperature

-20°C to +60°C [-4°F to 140°F]

Operating humidity

0 to 90% RH non condensing

Max operating altitude

9843’ [3000 m] above sea level

AGENCY APPROVALS & CERTIFICATIONS

• Conforms to UL458, Certified to CSA C22.2 No. 107.1, meets FCC Class B

Testing for specifications at 25°C.

Specifications subject to change without notice.

GENERAL NOTES