Type 7016

4 | 17

Visit product website 

1.

General technical data

Product properties

Dimensions

Further information can be found in chapter “6. Dimensions” on page 8.

Material

Seal

FKM, EPDM

Housing

Polyphenylene sulphide (PPS)

Weight

Push-in housing 1.)

115 g

Flange housing 1.)

110 g

Orifice

DN 1.6…DN 2.7

Circuit function

C

Further information can be found in chapter “3. Circuit functions” on page 5.

Thermal insulation class of

solenoid coil

Epoxy coil class H

Performance data

Duty cycle/single valve

100 % continuous operation (at max. + 65 °C ambient temperature)

Switching time 2.)

Opening: 8…15 ms

Closing: 15…20 ms

Electrical data

Operating voltage

24 V/DC

Nominal power

7 W

Voltage tolerance

± 3 %

Medium data

Operating medium

Neutral and aggressive gases and liquids (e.g. air, water, coffee, milk)

(see chapter “5.1. Bürkert resistApp” on page 7)

Medium temperature

Liquid medium: + 5 °C…+ 100 °C

Gaseous medium: + 5 °C…+ 145 °C

Viscosity

Max. 21 mm2/s

Process/Port connection & communication

Electrical connection

Flat pin terminal (6.3 x 0.8) as protection class III device

Port connection

Flange

Push-in housing (hose outer diameter 6 mm)

Push-in housing (hose outer diameter 4 mm)

Approvals and conformities

Degree of protection

IP20

North America (USA/Canada)

Further information can be found in chapter “4.4. North America (USA/Canada)” on page 6.

Foods and beverages/Hygiene

Further information can be found in chapter “4.5. Foods and beverages/Hygiene” on page 6.

Environment and installation

Installation position

As required, preferably with actuator upright

Ambient temperature

Max. + 65 °C

1.) Standard version 24.5 mm solenoid coil

2.) Measurement at + 20 °C, nominal pressure 3.) at the valve outlet acc. to DIN ISO 12238:2001, opening: pressure build-up 0…10 %, closing: pressure reduction 100…90 %

3.) Pressure data: overpressure to atmospheric pressure and air as a medium