www.sensata.com

Page 5

Copyright © 2020 Sensata Technologies, Inc.

ORDERING OPTIONS

Example : CWA2410EPH-10

Not all part number combinations are available.

Contact Technical Support for information on the availability of a specific part number.

GENERAL NOTES

(1)

All parameters at 25°C unless otherwise specified.

(2)

“P” option output will self trigger between 450-600 Vpk. Power factor 0.7 or higher, not suitable for capacitive loads.

(3)

Heat sinking required, see derating curves

(4)

For ambient temperature above 40°C the maximum control voltage must not exceed 250 VAC.

(5)

Increase minimum voltage by 1V for operations from -20 to -40°C.

(6)

Turn-on time for Instantaneous turn-on versions is 0.1 msec and 7msec for CWU models.

(7)

AC input models operating range is -20 to 80 °C.

(8)

All parameters at 50% power rating and 100% duty cycle (contact tech support for detailed report).

(9)

Load can be wired to either SSR output terminal 1 or 2.

(10)

Select P option for overvoltage protection.

(11)

For single surge pulse Tc=25°C; Tj=125°C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by √2 (1.414).

For additional information or specific questions, contact Technical Support

CW

-

A

-

24

-

10

-

E

-

P

-

H

-

-10

Series

CW

Control Voltage

D: 3-32 VDC

U: 20-48 VDC or 20-280 VAC

A: 90-280 VAC

AxxxxE: 18-36 VAC

Operating Voltage

24: 24-280 VAC

Rated Load Current

10: 10 Amps

25: 25 Amps

50: 50 Amps

90: 90 Amps

125: 125 Amps

Control Voltage

AxxxxE: 18-36 VAC

Overvoltage Protection

Blank: Not Included

P: Included (2)

Thermal Pad

Blank: Not Included

H: Included

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On

Required for valid part number

For options only and not required for valid part number