Visit product website 

DATA SHEET

Type 8805



Ball valve / Butterfly valve

with pneumatic rotary

actuator

Type 2051



Pneumatic rotary actuator

Type 8798



Remote sensor for

pneumatically actuated

process valves

Type 2301



Pneumatically operated

2-way Globe Control

Valve

Type 2300



Pneumatically operated

2-way angle seat control

valve ELEMENT

Type 2103



2/2-way diaphragm valve

with pneumatic stainless

steel actuator (Type ELE-

MENT) for decentralised

automation

Standard | EU | en | 2024 - 03 - 07 | 21

Digital electropneumatic positioner SideControl BASIC

• Compact and robust design

• Easy start-up using Tune function

• Integrated diagnostic functions for valve monitoring

• Dynamic actuating system with no air consumption in controlled state

• IO-Link, AS interface or Bürkert system bus (büS)

The robust and compact positioner is designed for mounting on linear and rotary

actuators with standardisation according to IEC 65034 - 6 - 1 or VDI/VDE 3845

(IEC 60534 - 6 - 2) The variant with remote position sensor can also be used to

control Bürkert process control valves. The set-point value setting default for

the digital electropneumatic positioner SideControl BASIC occurs via standard

signals 4…20 mA and/or via bus as an option. A digital input and optional

analogue feedback are also available. The valve opening is qualitatively signalled

via a mechanical display element and the device status, via 3 coloured LEDs.

All operating elements are located inside the housing. Start-up is performed auto-

matically and the following functions are enabled directly on the device via DIP

switch: sealing threshold, inversion of set point signal direction, characteristic

selection, manual/automatic operating state switchover. Additional options for

configuration and parametrising, such as the linearisation of the operating charac-

teristic with the aid of a freely programmable correction characteristic, are available

using communication software. The pneumatic actuating system can be used

equally for single-acting and double-acting actuators. It is characterised by a

defined safety response in the event of the failure of the electrical or pneumatic

auxiliary power and possesses an enormous air capacity range at pressure sup-

plies up to 7 bar.

Product variants described in the data sheet may differ from the product presentation and description.

Type description

Can be combined with

Type 8791

© Christian Bürkert GmbH & Co. KG, Subject to alteration