Type 5413

4 | 14

Visit product website 

2.

Product versions

2.1. Standard version

Product properties

Dimensions

Detailed information can be found in chapter “5.1. Standard ver-

sion” on page 7.

Electrical data

Operating voltage

24 V DC

24/110/230 V, 50…60 Hz

Power consumption

Inrush

AC: 11 VA

Hold (hot coil)

AC: 6/2 VA/W

DC: 2 W

Voltage tolerance

+ 10 %

Process/Port connection & communication

Port connection size

G ¼

Electrical connection

Tag connectors according to DIN EN 175 301 - 803 Form A for cable

plug Type 2518

Detailed information can be found in chapter “Cable plug Type

2518, Form A according to DIN EN 175301 - 803” on page 12.

Environment and installation

Installation position

As required, preferably with solenoid system upright; Air exhausted

from the relief port with pressed sintered bronze silencer must not be

impeded.

Ambient temperature (max.)

55 °C

2.2. ATEX/IECCEx version

Note:

The approval Ex m is achieved by the mounting of an approved push-over coil. The cable connection and the cable are non-detacha-

ble and sealed together with the valve. The valves can be used individually or in blocks.

Product properties

Dimensions

Detailed information can be found in chapter “5.2. ATEX/IECEx

version” on page 8.

Electrical data

Operating voltage

24/110/230 V UC

Voltage tolerance

+ 10 %

Process/Port connection & communication

Port connection size

G ¼

Electrical connection

3 m cable, moulded

Junction box (without fuse)

Approvals and certificates

Type of protection (ATEX and IECEx)

With moulded cable

EPS 18 ATEX 1232 X / IECEx EPS 18.0110X

II 2G Ex mb IIC (T4/T5/T6) Gb

II 2D Ex mb IIIC T (130 °C/95 °C/80 °C) Db

With junction box

EPS 16 ATEX 1046 X / IECEx EPS 16.0021 X

II 2G EX eb mb IIC (T4/T5/T6) Gb

II 2D EX mb tb IIIC (130 °C/ 95 °C/ 80 °C) Db

Environment and installation

Installation position

As required, preferably with actuator upright

Ambient temperature

Single mounting: - 30 °C…+ 60 °C

Block mounting: - 30 °C…+ 50 °C