PCTEL, Inc. WEB: www.antenna.com

MOBILE ANTENNAS

MLPV NO GROUND PLANE Series

*Measured on a 4 foot diameter ground plane. Gain is ground plane dependent.

PCTEL’s low-profile antennas provide superior pattern coverage for mobile and fixed

applications. The no ground plane design provides industry leading performance

and reliability, with minimum loss and no tuning required. This antenna series

features an attractive, compact housing ideal for both indoor or outdoor applications.

Antennas can be purchased separately, or as a kit assembly with the MVPHP mount for

permanent installations (VP option).

Features

• Attractive, low-profile design for maximum overhead clearance

• Industry leading performance provides outstanding coverage across multiple

frequency bands without a ground plane

• IP67 rated for ingress protection against severe environmental conditions

• Mates with all 1-1/8”-18 thread mounts, including 3/4” mounts

• N Female termination option available on select models (VP Option)

No Ground Plane MLPV Low-Profile Vertical Antennas

BMLPV900NGPVP

ELECTRICAL SPECIFICATIONS

Model

Frequency Range

Gain*

VSWR

Maximum

Power

Nominal Impedance

Polarization

BMLPV900NGP

902-928 MHz

Unity

< 2.0:1

100 watts

50 ohms

Vertical, linear

BMLPV2400NGP

2400-2500 MHz

3 dBi

< 2.0:1

100 watts

50 ohms

Vertical, linear

BMLPVMBLTENGP

698-960 MHz / 1710-2700 MHz

3 dBi

< 2.0:1

100 watts

50 ohms

Vertical, linear

WMLPVMBLTENGP

698-960 MHz / 1710-2700 MHz

3 dBi

< 2.0:1

100 watts

50 ohms

Vertical, linear

Low-Profile Whipless Antennas

MECHANICAL & ENVIRONMENTAL SPECIFICATIONS

Model

Dimensions

Weight

Housing Material

Temperature

Range

Color

BMLPV900NGP

1.50 OD x 3.38 H in (3.81 x 8.59 cm) 0.31 lbs (.14 kg)

Chrome Coil - Bushing ZINC

Top Cover - ZINC DIECAST

-40° C to +85°C Black

BMLPV2400NGP

1.50 OD x 3.38 H in (3.81 x 8.59 cm) 0.31 lbs (.14 kg)

-40° C to +85°C Black

BMLPVMBLTENGP

1.44 OD x 3.54 H in (3.66 x 8.99 cm) 0.40 lbs (0.18 kg)

-40° C to +85°C Black

WMLPVMBLTENGP 1.44 OD x 3.54 H in (3.66 x 8.99 cm) 0.40 lbs (0.18 kg)

-40° C to +85°C White over Chrome

BMLPVMBLTENGP

STANDARD CONFIGURATION

MLPV antennas mate with 1-1/8”-18 thread mounts, including 3/4” mounts (sold separately). For models operating at frequencies over 600 MHz,

high frequency mounts are recommended:

MLFML195C: High performance permanent mount 3/4” hole, 1-1/8”-18 thread interface. Includes 17 ft of Pro-Flex™ Plus 195 cable. Loose TNC

male connector included. Optimized for frequencies over 600 MHz. Configurable.

GMLFML195C: High performance magnetic mount 3-1/4” diameter base, 1-1/8”-18 thread interface. Includes 12 ft of Pro-Flex™ Plus 195 cable

terminated with TNC male connector (attached). Optimized for frequencies over 600 MHz. Configurable.

MTPM800: 5/8” hole, 1-1/8”-18 thread mount for surfaces up to 1/2-inch thick. Terminates in an N Female connector. No cable.** Supports 24

MHz - 6 GHz.

MVPHP: 5/8” hole, vandal proof mount. No cable.** Supports 24 MHz - 6 GHz. Add suffix “VP” to the MLPV part number to have this mount

permanently installed at the factory. VP option will not be removable from factory installed “VP” antennas. (example: BMLPV900VP.)

MMF: 3/4” hole, 1-1/8”-18 mount. Terminates in an SMA, Male connector. No cable.** Supports 24 MHz - 6 GHz.

MMF-VP: 3/4” hole vandal-proof mount for frequencies from 0 GHz to 6 GHz. 1-1/8”-18 thread interface. Terminates in SMA, Male connector. No

cable**. Accommodates surfaces up to .09-inch thick.

RoHS

COMPLIANT