M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

Also Offering

RoHs Compliant

Equivalent Parts

V7

MA4ST2000 Series

5

Ultra High Ratio Si Hyperabrupt Varactor Diode

Mounting Information

The

illustration

indicates

the

recommended

mounting

pad

configuration

for

the

SC-79, SOT-323 and SOD-323 packages. Solder

paste containing flux should be screened onto

the pads to a thickness of 0.005- 0.007 inches.

The plastic package is placed in position, firmly

adhering to the solder paste.

Permanent attachment is performed by a reflow

soldering

procedure

during

which

the

tab

temperature does not exceed +275

°C and the

body temperature does not exceed +250

°C, for

standard models and +260

°C for the RoHS

compliant devices.

Please refer to Application Note M538 for

surface mounting instructions.

SOT-323

0.030

0.80

0.030

0.80

0.030

0.80

0.075

1.9

0.030

0.80

inches

mm

Dimenstions:

SOD-323

0.030

0.80

.090

2.2

0.030

0.80

inches

mm

Dimenstions:

0.030

0.80

SC-79

0.020

0.50

0.053

1.35

inches

mm

Dimenstions:

0.020

0.50