High Dynamic Range Low Noise Amplifier

1400 - 2000 MHz

MAAMSS0045

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V1

2

RoHS

Compliant

Parameter

Absolute Maximum

+10 VDC

Input Power

+17 dBm

80 mA

+150°C

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

4. When pin #2 is used to increase current. (See note 7.)

5. Thermal resistance (

θjc) = +99°C/W.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive to

electrostatic discharge (ESD) and can be damaged by

static electricity. Proper ESD control techniques should

be used when handling these devices.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Gain

dB

12.0

14

—

3 V, 20 mA

dB

—

12.5

—

Noise Figure

dB

—

1.4

1.8

3 V, 20 mA

dB

—

1.5

—

Input VSWR

—

Ratio

—

1.5:1

—

Output VSWR

—

Ratio

—

2.0:1

—

Output 1 dB Compression

dBm

—

16.0

—

3 V, 20 mA

dBm

—

9.0

—

dBm

13.0

15

—

3 V, 20 mA

dBm

—

8.0

—

Reverse Isolation

—

dB

—

22

—

Drain Current

mA

30

45

60

Input IP3

1. Using external 15 Ω resistor. See functional schematic on page 3.