SPDT High Isolation Terminated Switch

0.5 - 3.0 GHz

MASWSS0121

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V3

2

RoHS

Compliant

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

0.5- 1 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

—

—

—

0.6

0.7

0.75

0.7

0.8

0.9

Isolation

0.5 - 1 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

51

48

45

54

52

50

—

—

—

Return Loss

0.5 - 1 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

—

—

—

20

20

20

—

—

—

2-Tone 900 MHz, 5 MHz spacing

dBm

—

83

—

2-Tone 900 MHz, 5 MHz spacing

dBm

—

43

—

10% to 90% RF & 90% to 10% RF

nS

—

24

—

nS

—

15

—

Transients

mV

—

12

—

2. External DC blocking capacitors are required on all RF ports (47 pF capacitors are recommended).

Parameter

Absolute Maximum

Input Power (0.5 - 3.0 GHz)

3 V Control

5 V Control

+30 dBm

+33 dBm

Operating Voltage

+8.5 volts

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.

Logic Level

Voltage Level

0

0 V ± 0.2 V

1

3.0 V to 8.0 V

Truth Table

V1

V2

RFC - RF1

RFC - RF2

0

1

ON

OFF

1

0

OFF

ON

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.